volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Windshield Wiper Blades, Checking End Position and Angle|Page 16403 > < Windshield Wiper Blades, Checking End Position and Angle
Page 2
background image

The space - A - between the wiper rubber and bottom edge of windshield must be 20 mm.

-

If necessary, adjust the park position by relocating the wiper arm. 

Wiper arm tightening specification: 20 Nm

Windshield Wiper Blades, Checking Angle and Adjusting

‹› Check the angle setting only if the wiper blades pulsate or make noise.

Special tools, testers and auxiliary items required

‹› Wiper blade adjuster (3358 B)

Perform the following work procedure:

-

Bring windshield wiper arms in end position.

-

Remove windshield wiper.

-

Set windshield wiper arm - 2 - in the wiper blade adjuster (3358 B) and secure with the locking screw -  3 -.

Windshield Wiper Blades, Checking End Position and Angle|Page 16403 > < Windshield Wiper Blades, Checking End Position and Angle