New Beetle L5-2.5L (BPS) (2006)
Front Door Exterior Handle: Service and Repair
Bearing Bracket
Front Door
Bearing Bracket
Removing
-
Remove lock cylinder housing. Refer to=> [ Lock Cylinder Housing ]. See: Service and Repair/Removal and Replacement/Front Door/Removal
and Installation/Lock Cylinder Housing
-
Remove door handle. Refer to => [ Door Handle ]. See: Service and Repair/Removal and Replacement/Front Door/Removal and Installation/Door
Handle
-
Remove subframe. Refer to => [ Door Lock, Convertible ].
-
Remove bolt - 1 - push mounting bracket in door toward rear and unhook retaining tab - 2 - from door opening.
Installing
Installation is performed in the reverse order of removal.
-
Before installing mounting bracket, check or establish proper installation position of spring lever - 1 -.
Spring bracket - 1 - must be pressed into bearing bracket against spring pressure, and blocked in this position by movable locking mechanism - 2 -.