New Beetle L5-2.5L (BPS) (2006)
Removal
-
Remove operating lever.
-
Remove bolt - 5 - and remove expanding nut - 6 -.
-
Remove side trim. Refer to => [ Side Trim Assembly Overview ] .
-
Unclip sill panel - 1 - upward.
Installation
To install, perform the steps used in removal in reverse order.
‹› Before installing the sill panel, check the clips -=> [ (Item 2) Clips ] See: Sill Panel Trim Assembly Overview- and replace, if necessary.
‹› After installing, make sure that sill panel seal is properly seated - 8 -.