New Beetle L5-2.5L (BPS) (2006)
Installing
‹› Press piston back into caliper housing using resetting tool before inserting new brake pads. Before pushing back the piston, siphon some of the
brake fluid out of the brake fluid reservoir. Otherwise, if reservoir has been topped off, fluid will overflow and cause damage.
-
Press piston back.
-
Install inner brake pad (piston side) - 1 - and outer brake pad - 2 - in brake caliper housing using retaining springs.
‹› Inner brake pad (piston side) with large three-finger clip - 1 -.
‹› Outer brake pad with small three-finger clip - 2 - (black).
-
Install brake pad with black three-finger clip in brake caliper housing.
-
Install brake caliper housing - arrow - at bottom first.