New Beetle L5-2.5L (BPS) (2006)
6
Brake caliper housing
‹› Removing and installing => [ Brake Caliper ] See: Brake Caliper.
7
Brake carrier
‹› Bolt to brake caliper housing
8
Retaining spring
‹› Insert with both ends in holes of brake caliper housing
9
Seal
‹› Removing and installing => [ Brake Caliper Piston ] See: Overhaul/Brake Caliper Piston.
10
Pistons
‹› Removing and installing => [ Brake Caliper Piston ] See: Overhaul/Brake Caliper Piston.
‹› Apply thin coat of assembly paste (G 052 150 A2 ) on piston
‹› Piston diameter: 54 mm
11
Protective seal
‹› Do not damage when installing piston
Rear Brake Caliper Assembly Overview
Rear Brake Caliper Assembly Overview
‹› Install complete repair kit when servicing.
‹› New brake calipers are filled with brake fluid and are pre-bled.
‹› Apply a thin coat of assembly paste (G 052 150 A2 ) to brake cylinders, pistons and seals.
‹› In case of repair, brake calipers must always be pre-bled before being installed into vehicle (without brake pads) => [ Brake Caliper, Pre-Bleeding
] See: Overhaul/Brake Caliper Piston.