New Beetle L5-2.5L (BPS) (2006)
Brake Master Cylinder: Service and Repair
Brake Master Cylinder
Brake Master Cylinder
Special tools, testers and auxiliary items required
‹› Hose clamps up to 25 mm dia. (3094)
Removing
-
Note radio code (for vehicles equipped with coded anti-theft radio).
-
Disconnect battery.
-
Disconnect intake air duct - 1 - and connector - 2 - from Mass Air Flow (MAF) sensor (G70).
-
Remove bolts - 3 -, - 4 - and - 5 -.
-
Remove complete air filter.
-
If present, remove protective housing for relay from cable channel.
-
Place sufficient lint-free cloths around plenum chamber, engine and transmission.
-
Draw as much brake fluid as possible from brake fluid reservoir using a bleeder bottle.
-
Clamp return hose of clutch master cylinder shut using hose clamp (3094).
-
Disconnect supply hose for clutch master cylinder.
-
Disconnect harness connector for brake fluid level warning switch.
With ABS/EDL/ASR/ESP
-
Disconnect connectors - arrows - of brake pressure sensors - a - and - b -.