Volkswagen Workshop Service and Repair Manuals

Brake Booster Vacuum Sensor: Service and Repair
ABS Wheel Speed Sensor

Front Axle

ABS Wheel Speed Sensor

Removing

-

Raise vehicle.

-

Disconnect harness connector - 1 - from wheel speed sensor wire and wheel speed sensor.

-

Remove bolt - 2 - from wheel bearing housing.

-

Disconnect ABS wheel speed sensor from wheel bearing housing.

Installing

-

Before inserting wheel speed sensor, clean inner surface of hole and coat sensor completely with securing grease (G 000 650 ).

-

Insert wheel speed sensor in hole of wheel bearing housing and tighten bolt to 8 Nm.

-

Connect wheel speed sensor and sensor wire.

-

Turn wheels completely to left and right stop positions and check clearance to ABS wheel speed sensor wiring.

Rear Axle

ABS Wheel Speed Sensor

Removing

-

Raise vehicle.

-

Disconnect harness connector - 1 - from wheel speed sensor wire and wheel speed sensor.