New Beetle L5-2.5L (BPS) (2006)
6. Ribbed belt, for the A/C compressor
7. Crankshaft pulley/vibration damper
8. Ribbed belt tensioner pulley, for the A/C compressor belt
9. Ribbed belt tensioner pulley, for the generator, power steering pump and coolant pump belt
10. Coolant pump pulley
Ribbed Belt
Ribbed Belt
Special tools, testers and auxiliary items required
‹› Locking pin (T10060A)
Removing
-
Remove the right main headlamp.
-
Remove the noise insulation.
-
Remove the right front wheel housing liner.
Removing the Ribbed Belt for the Air Conditioning (A/C) Compressor
-
Mark the direction of rotation of the ribbed belt.
-
Rotate the belt tensioner - 1 - as shown using a 15 millimeter (mm) box end wrench - A - in the - direction of the arrow - and secure using
(T10060A ).
-
Remove the ribbed belt for the A/C compressor.
Removing the Ribbed Belt for the Generator, Power Steering and Coolant Pumps
-
Relieve the tension on the belt tensioner - 1 - for the A/C compressor belt (pull out the (T10060A)).
-
Mark the running direction of the ribbed belt for the generator, power steering and coolant pumps.
-
Insert the (T10060A) into the belt tensioner - 2 -.