New Beetle L5-2.5L (BPS) (2006)
/Page-854006.png)
-
Carefully lower the engine with transmission only as far downward - arrow 2 - until pin - 4 - of transmission mount bracket can be slid toward the
left - arrow 3 - out from under the transmission mount.
-
Slide the engine/transmission assembly until it stops at left longitudinal member.
-
Rotate the pulley so that arrow - A - (relative to engine axis) points upward vertically.
-
Remove the coolant pump bolts - arrows -.
-
Pull the coolant pump - A - out of the cylinder block.
