New Beetle L5-2.5L (BPS) (2006)
Headlamp Switch: Service and Repair
Headlamp Adjuster and Instrument Panel Illumination Dimmer Switch
Interior Lamps and Switches
‹› When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic
sedge, screwdriver) will be positioned using commercially available adhesive tape.
Headlamp Adjuster and Instrument Panel Illumination Dimmer Switch
The Headlamp Adjuster (E102)/ Instrument Panel Illumination Dimmer Switch (E20) are a single unit and cannot be replaced separately.
CAUTION!
‹› Turn off the ignition and all electrical components.
‹› Remove the key.
‹› When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying
tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.
Removing
-
Carefully loosen the switch housing from the frame with a small screwdriver and remove it.
-
Disconnect electrical connector.
Installing
Install in reverse order of removal.