New Beetle L5-2.5L (BPS) (2006)
/Page-1341003.png)
-
Slide the retaining clip - 3 - as shown into the groove of the injector. Collar - 4 - must be located correctly in the cutout of the retaining clip on
both sides.
-
After assembling, check all injectors for correct installation.
-
Install the fuel rail with secured injectors to the intake manifold and press it in uniformly.
-
Secure the fuel rail to the intake manifold.
The rest of the installation follows the reverse of the removal procedures. When doing this note the following:
-
Bleed the fuel supply system. Refer to one of the following:
‹› Engine code BPS, refer to => [ Fuel System, Bleeding ] See: Fuel Tank/Description and Operation.
‹› Engine code BPR, refer to => [ Fuel System, Bleeding ] .
-
Connect the battery.
Tightening Specifications
