New Beetle L5-2.5L (BPS) (2006)
/Page-1426003.png)
-
Insert ignition key into lock cylinder and turn it to "Drive ".
-
Unlock the lever with a steel wire (approximately dia. 1,2 mm) and install the lock cylinder into the steering lock housing.
‹› When inserting lock cylinder, make sure connection for Anti-Theft Immobilizer Reading Coil (D2) is inside the guide in the steering lock housing.
-
Pull the steel wire out of the lock cylinder and then check to make sure the lock cylinder fits securely in the steering lock housing.
-
Connect the connector - arrow - from the Anti-Theft Immobilizer Reading Coil (D2) to the lock cylinder.
