New Beetle L5-2.5L (BPS) (2006)
/Page-2306003.png)
‹› Always replace after removal
16
Stabilizer bar
Subframe must be lowered for removal and installation.
‹› Different versions
17
Socket head bolt
18
Hex bolt
‹› M 14 x 1.5 x 95
‹› Tightening specification => [ Subframe ] See: Specifications/Front Suspension.
‹› Always replace after removal
19
Front bearing for control arm
‹› Pressing out => [ Pressing Off Front Bushing for Control Arm ] See: Control Arm/Control Arm Bushing/Service and Repair
‹› Pressing in => [ Press In Front Bushing for Control Arm ] See: Control Arm/Control Arm Bushing/Service and Repair
20
Hex bolt
‹› M 12 x 1.5 x 82
‹› Tightening specification => [ Control Arm ] See: Specifications/Front Suspension.
‹› Always replace
21
Hex bolt
‹› M10 x 70
‹› Tightening specification => [ Pendulum Support ] See: Specifications/Front Suspension.
‹› Always replace after removal
22
Hex bolt
‹› M10 x 30
‹› Tightening specification => [ Pendulum Support ] See: Specifications/Front Suspension.
‹› Always replace after removal
23
Pendulum supports
‹› Different versions
24
Hex bolt
‹› M8 x 45
‹› Tightening specification => [ Pendulum Support ] See: Specifications/Front Suspension.
25
Rubber bushing
26
Clamp
27
Hex bolt
‹› M8 x 18
