New Beetle L5-2.5L (BPS) (2006)
6
Brake caliper housing
‹› Do not remove brake hose when replacing brake pad
‹› Removing and installing => [ Brake Caliper ] See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and
Repair/Removal and Replacement/Brake Caliper.
‹› Servicing => [ Front Brake Caliper Assembly Overview ] See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and
Repair/Removal and Replacement/Front Brake Caliper Assembly Overview.
7
Guide pins, 28 Nm (18 ft lb)
8
Concealment cap
‹› Remove
9
Brake hose with ring supports and banjo fitting, 35 Nm
10
Ribbed bolt w/washer assembly, 125 Nm
11
Wheel bearing housing
12
Socket head bolt, 8 Nm
13
Right front ABS wheel speed sensor (G45)/left front ABS wheel speed sensor (G47)
‹› Before inserting sensor, clean inner surface of hole and coat with securing grease (G 000 650)
14
Cover plate
15
Hex bolt, 10 Nm
16
Wheel bearing
‹› Always replace after removal
17
Circlip
18
Wheel hub with rotor
19
Brake pads
‹› Vehicles as of model year 2001
‹› With wear indicator
‹› When the appropriate wear limit has been reached (limit: 2 to 3 mm), brake pad wear indicator lamp ( K32) lights up in instrument panel
‹› Thickness 14 mm
‹› Checking thickness=> 14.1
‹› Pads on both sides of axle must always be replaced together
‹› Removing and installing => [ Brake Pads ] See: Brakes and Traction Control/Disc Brake System/Brake Pad/Service and Repair/Removal and
Replacement.
‹› Wear limit: 7 mm including backing plate
20
Harness connector
‹› For pad replacement, remove from bracket => [ (Item 21) Bracket ]
21
Bracket