New Beetle L5-2.5L (BPS) (2006)
Clutch Pedal Assembly: Service and Repair
Over-Center Spring
Over-Center Spring
Special tools, testers and auxiliary items required
‹› Assembly clip (T10111)
Removing
-
Slide driver's seat rearward as far as possible and bring steering wheel to highest position.
-
Remove cover in driver's side footwell.
-
Insert assembly clip (T10111) into over-center spring from right side.
-
While doing this, make sure assembly clip is seated properly on over-center spring:
1
Assembly clip must make contact on rear part of over-center spring with claws directly above brace - 1 -.
2
Press clutch pedal lightly in direction of bulkhead. Engage tab - 2 - of assembly clip into cut out of over-center spring.
-
Now press clutch pedal to bulkhead far enough until over-center spring can be removed downward out of bearings on mounting bracket and clutch
pedal.
-
Bring clutch pedal to rest position.
-
Turn over-center spring together with assembly clip (T10111) in direction of - arrow A - and remove downward in direction of - arrow B -.