New Beetle Convertible L5-2.5L (BPR) (2007)
-
Remove bolts - 1 -, - 3 - and nut - 2 -. Remove upper subframe from door, lift and lift out from door toward hinge side of door.
-
Rotate subframe and disconnect harness connector from door lock.
-
Drive out clips - 1 - using a drift.
-
Using a screwdriver - 3 -, pry off door lock with angle bracket from subframe.
-
Pull cable - 2 - out of subframe.
‹› Angle bracket is not part of parts supplied with door lock. It is secured to door lock with a bolt and a blind rivet.
-
Unclip cable - 1 -.