New Beetle Convertible L5-2.5L (BPR) (2007)
Front Brakes, FN 3
Brake Caliper Piston
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
‹› Piston resetting tool (T10145)
Removing
‹› Place a wooden board into the recess of the caliper housing to catch the piston so it is not damaged.
-
Force piston from brake caliper housing using compressed air.
-
Remove seal using trim removal wedge (3409).
‹› When removing, make sure that surface of cylinder is not damaged.
Installing
-
Use only appropriate solvent to clean surfaces of piston and protective seal, then dry.
-
Apply thin coat of assembly paste (G 052 150 A2 ) to piston and protective seal before installing.
-
Install sealing ring in brake caliper housing.
-
Place protective cap with outer sealing lip on piston.