New Beetle Convertible L5-2.5L (BPR) (2007)
/Page-828002.png)
-
Disconnect connectors - 1 and 3 -.
-
Disconnect the pressure pipe - 2 - from the Secondary Air Injection (AIR) valve.
-
Remove the rear coolant pipe - 4 -.
-
Disconnect the vacuum hose - 6 - from the vacuum pump and disconnect the connector - 7 -.
-
Remove the brackets - 8 and 9 - and set the wiring harness with pressure pipe aside.
-
Press the bracket for the knock sensor wiring harness at the AIR valve slightly toward the rear.
-
Remove the coolant distribution housing - 5 - and set it aside with the coolant hoses connected.
-
Remove all the bolts for the chain compartment cover.
-
Pry off the chain compartment cover - 1 - uniformly from the cylinder head - 2 - at the top and bottom recesses.
