New Beetle Convertible L5-2.5L (BPR) (2007)
/Page-853005.png)
‹› Remove pin (T03000/1) from (T03000).
‹› Install the (T03000) to the cylinder block with pin - 3 - and tighten the bolts - 1 and 2 - hand tight.
‹› Then install pin (T03000/1) and tighten to 20 Nm.
‹› Then tighten bolts - 1 and 2 - to 25 Nm.
-
Place the (T03000) on the (VAG 1383A) and lift the engine/transmission assembly slightly.
-
Remove the engine mount bolts - arrows - from above and remove.
‹› Use (VAS 5085) to remove the bolts.
-
Remove both front bolts from the holding fixture.
-
Remove the transmission mount bolts - arrows - from above.
