New Beetle Convertible L5-2.5L (BPR) (2007)
^
Select Coding procedure to re-code original instrument cluster to -3-
Canada (CDN).
Note:
Once coding is completed, verify odometer displays kilometers before
continuing with replacement procedure.
Now that the instrument cluster has been coded to kilometers:
^
Perform GFF procedure for replacement of instrument cluster.
Tip:
Test plan will adapt total driven distance and service interval reading automatically.
For all models except Passat and Touareg:
^
Complete the immobilizer adaptation procedure.
For Passat and Touareg Only:
^
Proceed directly to re-coding instrument cluster.
Re-coding
To code the instrument cluster back to mileage, repeat the above procedure:
^
Select Coding procedure to re-code new instrument cluster and change country version to -2- U.S.A.
Once coding is complete:
^
Verify odometer displays in miles.
Warranty
Information only.
Required Parts and Tools
No Special Parts required
No Special Tools required
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.