Overview of Brake Caliper and Wheel Bearing Housing for Beetle Convertible (2007)
/Page-721007.png)
Special tools, testers and auxiliary items required
^
Wheel bearing tool V.A.G 1459 B
^
Hollow piston cylinder HKZ-15 with thrust piece E-0-204-T hydraulic
^
Tie bolt E-0-217+218
^
Special nut E-8-214
^
Thrust piece E-5
^
Thrust piece E-10
^
Thrust sleeve E-13-1
^
Pressure bolt E-15
^
Thrust sleeve E-65-1
^
Supplementary set V.A.G 1459 B/2
^
Bell E-40
Removing
-
Lift vehicle enough that the front axle is no longer burdened.
-
Remove 12-point nut.
-
Raise vehicle to installation height.
-
Remove wheel.
-
Remove brake carrier with brake caliper or brake caliper and hang on body with tie wire.
-
Mark installation position of bolts - arrows - for ball joint - 1 - on control arm - 2 -.
-
Mark installation position of ball joint - 1 - to control arm - 2 -.
