New Beetle Convertible L5-2.5L (BPR) (2007)
‹› To ease reassembly, note how heating element wires are routed.
-
Remove heating element from seat cushion. Carefully separate both parts.
-
Cut the clips - arrow -
-
Disconnect sensor harness connector - 1 -
-
Disconnect harness connector for belt tensioner sensor. Press connector downward and then inward to do so - arrow -
-
Disconnect harness connector - 2 - and loosen from holding position.
-
Remove the wires from the securing clips if necessary - 3 -
‹› Loosen locking mechanism on upper side of harness connector - 1 - of control module to reconnect replacement part.
‹› Before removing the wires from securing clips - 3 -, note the routing and connection.
-
Remove the wires from the securing clips if necessary.
‹› Before removing the wires from the securing clips, note the routing and connection.
-
Loosen the hose clips - arrows - from the bracket.