New Beetle Convertible L5-2.5L (BPR) (2007)
-
Remove nut - 1 -.
-
Remove bolt - 5 -.
-
Pull off multi-function switch - 4 - with washers - 2 - and - 3 - from selector shaft - 6 -.
Installing
Installation is in reverse order of removal. Note the following:
-
Connect Multi-Function Transmission Range (TR) Switch (F125) - 4 - to selector shaft - 6 -.
-
Installing mounting bolts - 5 - for multi-function switch hand-tight.
-
Bend hooks of locking washer - 2 - back.
-
Install washers - 2 - and - 3 - onto selector shaft - 6 -.
‹› Install washer - 2 - with hook pointing upward.
‹› Install washer - 2 - with long narrow guides into long narrow recesses of selector shaft - 6 -.
-
Tighten nut - 1 - to 7 Nm.
-
Secure nut - 1 - on locking washer - 2 - by bending up hooks.
‹› If one or more hooks of the locking plate break off while bending, replace the locking plate.
-
Connect lever - 3 - to selector shaft - 4 -.