volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Rear Axle Beam Component Overview|Page 10398 > < Rear Axle Beam Component Overview|Page 10396
Page 2
background image

-

Remove plug from longitudinal member - 3 - and pull in tensioning strap (T10038).

1

Lift arm of lifting platform

2

Tensioning strap (T10038 )
Vehicle must be secured by tension belts on right and left sides.

With Automatic Headlight Range Control

-

Remove coupling rod of left rear level control system sensor (G76) from rear axle => [ Left Rear Level Control System Sensor Overview ] See:
Sensors and Switches - Suspension/Ride Height Sensor/Service and Repair/Left Rear Level Control System Sensor Overview.

Continuation for All

-

Unclip parking brake cable from bracket at rear axle body -  arrow A - and disengage from brackets - arrows -.

-

Remove clip - 1 -.

-

Place engine/transmission jack (V.A.G 1383 A ) with a cloth under brake line.

-

Disconnect brake lines.

Rear Axle Beam Component Overview|Page 10398 > < Rear Axle Beam Component Overview|Page 10396