New Beetle Convertible L5-2.5L (BPR) (2007)
Shift Interlock Solenoid: Service and Repair
Shift Lock Solenoid
Removing
-
First determine whether a coded radio is installed. In this case, determine anti-theft coding.
-
Move selector lever in position "R".
-
Switch ignition off and disconnect battery Ground (GND) cable.
-
Remove selector mechanism cover and circuit board => [ Selector Mechanism Cover and Circuit Board ] See: Shifter A/T/Service and
Repair/Removal and Replacement/Selector Mechanism Cover and Circuit Board.
-
Disconnect connector - arrow - from Shift Lock Solenoid (N110).
-
Pull up pull-rod and place selector lever in "P" with pull rod pulled up.
-
Raise vehicle.
-
Loosen double clamp - A - and slide toward rear.