New Beetle Convertible L5-2.5L (BPR) (2007)
‹› Install the nut so the centralizing shoulder faces the washer and runs into it when installed.
‹› Wiring harness must be routed under selector lever.
-
Tighten nut to tightening torque => [ (Item 30) Nut, 10 Nm ] See: Valve Body Assembly Overview.
‹› Carefully hold selector lever - 1 - in place using pliers - 2 -, so that torque is not transferred onto Multi-Function Transmission Range (TR) Switch
(F125).
‹› Make sure that slide valve - 3 - on valve body, in which the selector lever engages, is not damaged.
-
Connect connectors to solenoid valves - 2 - to - 9 - according to markings made previously.