New Beetle Convertible L5-2.5L (BPR) (2007)
/Page-3428002.png)
Due to the curve of the lid it is not possible to lay cutting cord at sides and upper edge into window flange.
-
Secure one cord end to spooling tool (V.A.G 1654).
-
In place of spooling tool (V.A.G 1654 ), the spooling tool (V.A.G 1654 A ) can also be used.
-
As shown in illustration, one suction cup can be removed from spooling tool. By doing this, the roller of the spooling tool in the radii can be
placed closer to window flange.
-
Pull through second cord inward and attach grip from (V.A.G 1351 ) to counterhold.
-
Set spooling tool (V.A.G 1654) into " Position I".
-
Move spooling tool according to position required and cut windshield free.
-
While cutting free, press cutting cord in direction of window using plastic wedge or awl (from (V.A.G 1474)) in order to have clearance at window
flange.
