New Beetle Convertible L5-2.5L (BPS) (2006)
Continuation for all convertible tops:
-
Disconnect electrical connectors - 5 - from speaker - 6 -.
-
Disconnect release - 3 - from ball stud - 1 -.
-
Pry off spring clips - 2 - and remove release - 3 - from retaining plate - 4 -.
-
Remove the front seat belt anchor.
-
Unclip cover - 2 - and guide seat belt - 1 - through the opening.
-
Remove the rear seat belt anchor.
-
Unclip cover - 8 - and guide seat belt - 7 - through the opening.
Installation
To install, perform the steps used in removal in reverse order.
‹› Before installing trim - 3 -, check clips - 5 - and - 6 - and replace if necessary.
‹› Install the release so that it is free of play.
‹› After assembling the trim, make sure the inner door seal is properly fitted.