New Beetle Convertible L5-2.5L (BPS) (2006)
2
Bleeder valve
‹› Lightly grease thread with assembly paste (G 052 150 A2) before screwing in
3
Caps
‹› Insert in mounting bushing
4
Guide pins, 28 Nm (18 ft lb)
5
Bearing bushing
‹› Insert in brake caliper housing
6
Brake caliper housing
‹› Removing and installing => [ Brake Caliper ] See: Service and Repair/Removal and Replacement/Brake Caliper.
7
Brake carrier
‹› Bolt to brake caliper housing
8
Retaining spring
‹› Insert with both ends in holes of brake caliper housing
9
Seal
‹› Removing and installing => [ Brake Caliper Piston ] See: Service and Repair/Overhaul/Brake Caliper Piston.
10
Pistons
‹› Removing and installing => [ Brake Caliper Piston ] See: Service and Repair/Overhaul/Brake Caliper Piston.
‹› Apply thin coat of assembly paste (G 052 150 A2 ) on piston
‹› Piston diameter: 54 mm
11
Protective seal
‹› Do not damage when installing piston