New Beetle Convertible L5-2.5L (BPS) (2006)
High Pressure Sensor / Switch: Service and Repair
A/C Pressure Switch and High Pressure Sensor
Removing
‹› Components can be removed without discharging refrigerant system.
-
Disconnect electrical connection to switch/sensor
-
Remove by turning switch/sensor - B - counterclockwise (switch/sensor threaded onto refrigerant pipe equipped with Schrader valve).
Installing
-
Install in reverse order of removal, noting the following.
‹› Always replace O-ring seal - A - (10.8; 1.8mm)
‹› Tightening torque 5 Nm.