New Beetle Convertible L5-2.5L (BPS) (2006)
Headlamp Switch: Service and Repair
Headlamp Switch
Interior Lamps and Switches
‹› When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic
sedge, screwdriver) will be positioned using commercially available adhesive tape.
Headlamp Switch
The Fog Lamp Switch (E23) is integrated in the Headlamp Switch (E1).
CAUTION!
‹› Turn off the ignition and all electrical components.
‹› Remove the key.
‹› When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying
tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.
Removing
-
Turn the Light Switch (E1) rotary knob to the "0" position.
-
Press the Headlamp Switch (E1) knob in - arrow 1 - and turn it slightly to the right - arrow 2 -.
-
Hold rotary handle in this position and pull Light Switch (E1) on rotary handle out of instrument panel - arrow 3 -.
-
Disconnect the connector on the Headlamp Switch ( E1).
Installing
-
Connect the connector to the Headlamp Switch ( E1).
-
Hold the Headlamp Switch (E1), push the rotary handle in and turn slightly to the right.
-
Hold the rotary handle in this position and insert the Headlamp Switch (E1) into the instrument panel - arrow 1 -.