New Beetle Convertible L5-2.5L (BPS) (2006)
Transmission Position Switch/Sensor: Adjustments
Multi-Function Transmission Range Switch, Adjusting
-
Place selector lever in position "N".
-
Do not bend selector lever cable.
Requirements:
‹› Selector lever cable has been removed from lever/selector shaft.
‹› Selector shaft in "N" position
‹› Mounting bolts of Multi-Function Transmission Range (TR) Switch ( F125) have been loosened
‹› Lever/selector shaft has been removed
Work procedure:
-
Attach adjustment fixture to selector shaft - 2 - and rotate multi-function switch - 1 - far enough until adjustment fixture engages on to tab on
connector at multi-function switch.
-
Fasten adjustment fixture onto selector shaft - 2 - using bolt - 3 -.
-
Tighten bolts - arrows - to 6 Nm.
-
Remove adjustment fixture.
-
Rest of installation is in reverse order of removal => [ Multi-Function Transmission Range Switch ] See: Service and Repair.