New Beetle GLS L4-1.8L Turbo (AWV) (2001)
-
Press in seal with press sleeve from 3265. To do this use old central bolt for crankshaft toothed belt sprocket.
-
Press sleeve in onto stop.
-
Install crankshaft toothed belt sprocket and hold with counter-hold tool 3099.
-
Tighten new central bolt to 90 Nm + 1/4 turn (90°) further.
Note:
^
When bolting on, place two washers between toothed belt pulley and counter-hold.
^
Thread and shoulder must be free of oil and grease.
-
Install toothed belt and adjust valve timing.
-
Install ribbed belt and tensioning element.