New Beetle GLS L4-1.8L Turbo (AWV) (2001)
NOTE:
-
Use harness kit (1J0 971 658N). If not obtainable, the harness can be assembled
-
Some parts are in the VAS 1978 wiring harness repair kit; other parts need to be ordered (Reference "Parts Information" on Page 2)
-
Instructions for harness assembly are in Section A4
IMPORTANT: The terminal ends on the wire harness from the kit or from the assembled harness are shown to correspond to the terminal connection
numbers on the relay connector
-
Open driver's door, remove instrument panel side cover -1-
-
Remove 2 screws -2- unclip trim panel -3- and remove
-
Remove 2 screws -2a- unclip trim panel -4- and remove
-
Remove (6) screws -arrows- and remove reinforcement -5-
-
Unclip and remove lower cover -6- by sliding rearward out of clips