volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC P0421/P0441 Set|Page 5699 > < Engine Controls - MIL ON/DTC P0421/P0441 Set|Page 5697
Page 3
background image

Current Tuned ECM or TCM requirements: If you encounter a vehicle with a "Tuned" ECM or TCM, your dealership must do the following
before performing any procedure that updates ECM or TCM programming.
-

Notify the owner that their ECM or TCM was found to have been tuned

-

Notify the owner any damage caused by the tuning of the ECM or TCM (including any adverse emissions consequences) will not be covered by
Volkswagen Group of America warranties.

-

Obtain the owner's written consent (see attached Control Module Tuning form) for any requested repair under warranty or outside warranty that
requires flashing, which will automatically overwrite the "Tuned" program.

-

If the vehicle has a tuned ECM or TCM, ensure the Control Module Tuning Form has been filled out.

Tip:  For vehicle with cold start misfire DTCs P0300-P0304, also add approved fuel additive to fuel tank before returning vehicle to customer. See
technical bulletin 2014815. If vehicle returns after software update and consumption of entire fuel tank with fuel additive with cold start misfire DTCs
P0300-P0304, select the "Technical Assistance" tab in ElsaWeb and follow the instructions to obtain a 6 digit pin.

Warranty

Required Parts and Tools

No Special Parts required.

Engine Controls - MIL ON/DTC P0421/P0441 Set|Page 5699 > < Engine Controls - MIL ON/DTC P0421/P0441 Set|Page 5697