New Beetle GLS L4-1.9L DSL Turbo (ALH) (2002)
^
Press piston back.
^
Insert brake pad with retaining spring in brake caliper housing.
^
Install brake caliper housing with brake pads to wheel bearing housing.
Notes:
^
Locate lower brake caliper housing (arrow) first.
^
The brake caliper housing tab (arrow) must be behind the wheel bearing housing guide.
^
Secure brake caliper housing to brake carrier with both guide pins to 28 Nm (21 ft. lbs.).
^
After installing new brake pads, depress brake pedal firmly several times with vehicle stationary to seat brake pads to brake disc.
^
Top up brake fluid to MAX mark.
FN 3 Caliper
Special tools and equipment
^
VAG 1331 Torque wrench or equivalent
^
Piston resetting tool
Removing
Note: If you reuse brake pads, mark the location and re-install them in the same position to avoid uneven braking