New Beetle GLS L4-1.9L DSL Turbo (ALH) (2002)
/Page-501002.png)
Component View
9. Connector
13. O-ring - Always replace
15. Bolts. Torque Specification: 15 Nm (11 ft. lbs.)
16. From radiator, lower part
17. Coolant thermostat
Checking: heat thermostat in water
Opening starts at approximately 85°C (185°F)
Ends approximately 105°C (221°F)
Opening lift: 7 mm min.
Removing
Note:
Always replace seals and gaskets.
-
Drain coolant. Refer to Cooling System, Service and Repair. See: Service and Repair
-
Remove coolant hose from connection -2-.
-
Remove bolts -1- of connection -2- and remove connection -2- along with thermostat -4-.
-
Turn thermostat -4- 1/4 turn (90) to left and remove from connection -2-.
Installing
