New Beetle GLS L4-1.9L DSL Turbo (ALH) (2002)
Install in the reverse order of removal but note the following:
-
Moisten new O-ring -3- with coolant.
-
Insert thermostat -4- in connection -2- and turn 1/4 turn (90°) to right.
Note: The brace on the thermostat must be almost vertical.
-
Install thermostat -4- into engine block.
-
Tighten bolt -1-. Tightening torque: 15 Nm (11 ft. lbs.).
-
Fill engine with coolant.