volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

A/C - Temperature Output Control Cannot Be Adjusted|Page 5516 > < Wheel Fastener|Specifications
Page 1
background image

Air Door Actuator / Motor: Customer Interest
A/C - Temperature Output Control Cannot Be Adjusted

85 07 01 

May 24, 2007

2012432, Supersedes Technical Bulletin Group 85 number 06-02 dated Jul. 14, 2006 due to addition of City Golf, City Jetta Models.

Affected Vehicles

Condition

HVAC, Temperature Output Control Cannot be Adjusted

Customer states cannot adjust temperature and/or A/C is not cold.

Technical Background

The blend door control lever moves freely, but the blend door does not operate.

A bushing that fits on the lever may have a broken tab/clip, -arrows-, as shown.

This tab/clip may cause the bushing to fall out of the fresh air housing which can result in the door becoming inoperative and result in undesired air
temperature.

Production Solution

No production change required.

Service

Tip:

In the past the entire fresh air housing was replaced because the bushing was not available as a separate part.

The bushing can be accessed from under the center console.

A/C - Temperature Output Control Cannot Be Adjusted|Page 5516 > < Wheel Fastener|Specifications