New Beetle GLS L4-2.0L (AVH) (2001)
Fig. 1 Double clamp installing position, checking
-
Position dual clamp with 5 mm distance for mark A-arrow-1
^
Mark A -arrow 1- for vehicles with automatic transmission
^
Mark S -arrow 2- for vehicles with manual transmission
Fig. 2 Installed position of mount
Angled side on foot of mount -arrow- points forward.
Fig. 3 Separation point on exhaust pipe
-
Separate exhaust pipe (at right angles) at separation point -arrow 2
-
When installing position repair double clamp -4- between points -arrows- 1 and 3
^
Tightening torque 40 Nm (30 ft. lbs.)
Fig. 4 Aligning center muffler free of stress
The mount pins on exhaust pipe must run parallel with tunnel bridge (dimension -x- left and right is identical)