New Beetle GLS L4-2.0L (AVH) (2001)
30
-
Connector
-
Black, 4 pins
-
For fuel gauge sender (G) and fuel pump (G6)
31
-
10 Nm( 7 ft lb)
Fig. 1 Fuel delivery unit flange, installed position
NOTE:
-
Mark on sensor must align with mark on fuel tank -arrows-.
-
Blue or blue marked return line -1- to connection with identification -R-.
-
Black supply line -2- to connection with identification -V-.
-
After installing fuel delivery unit flange, ensure that supply, return and breather lines are still clipped to the fuel tank.
Fig. 2 Change-over valve, checking
-
Valve in rest position: CLOSED
-
Valve pushed in direction of arrow: OPEN
NOTE: Remove fuel tank cap before installing change-over valve.
Fig. 3 Pressure retention valve, checking