New Beetle GLS L4-2.0L (AVH) (2001)
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press button -1 - twice to select function 11, "Login procedure".
Indicated on display
Rapid data transfer
Q
11 - Login procedure
-
Press -Q- button to confirm input.
Indicated on display
Login procedure
Q
Enter code number XXXX
-
Where applicable, read secret number located on the new vehicle key fob (visible by carefully "scratching off" protective coating, e.g. with a coin).
NOTE: If the 4-digit secret number is not known or the new vehicle key fob with the secret number is not available, the secret number must be
requested from the corporate radio/immobilizer code retrieval system by supplying the 14-character immobilizer control module identification number.
-
Using VAG 1551 button pad, enter secret number (when doing so, insert 0 before 4 digit number, example: 01915).
-
Press -Q- button to confirm input.
Indicated on display
Rapid data transfer
HELP
Select function XX
If this appears on display, secret number is not accepted:
Tester sends address word 17
-
Enter secret number again.
NOTE:
-
Three attempts to enter secret number are immediately possible. The next three attempts are only possible after a minimum of 10 minutes (if the
ignition remains switched on during this time and OBD program is exited via the function 06 "End output").
-
Waiting period between each three attempts doubles each time up to a maximum of 255 minutes.
-
Press buttons -1 - and -0- to select function 10, "Adaptation".
Indicated on display
Rapid data transfer
Q
10 - Adaptation
-
Confirm entry with -Q- button.
Indicated on display
Adaptation
Enter channel number XX
-
Press buttons -2- and -1- to select "Channel 21".
-
Press -Q- button to confirm input.
If this appears on display
Function is unknown or
->
cannot be carried out at the moment