New Beetle GLS L4-2.0L (AVH) (2001)
1
-
Igniter connector on inert igniter # 1.
-
Used to simulate correct resistance of igniter at airbag or seat belt.
2
-
Adapter harness with connectors for inert igniter # 2 (VAS 5056/2).
-
Used to connect inert igniter # 2 to airbag harness
3
-
Button
-
Used to simulate short circuit in harness through connectors.
Airbag, connecting test box to side airbag components, example
-
Connect adapter harness with connectors for inert igniter # 2 (VAS 5056/2) to airbag harness connector underneath seat. See Evaluating display
group 005 for specific diagnostic instructions. If diagnosis is not completed, proceed to next step.
-
Press button to simulate short circuit in airbag harness through connectors. Repair as directed. If diagnosis is not completed, proceed to next step.
-
Remove seat -1-.
Note:
When removing seat, always connect airbag adapter VAS 5094 as directed. See Repair Manual, Body-Interior, Repair Group 72.