New Beetle GLS L4-2.0L (AVH) (2001)
Rapid data transfer
HELP
Select function XX
If this appears on display, secret number is not accepted:
Tester sends address word 17
-
Enter secret number again.
NOTE:
-
Three attempts to enter secret number are immediately possible. The next three attempts are only possible after a minimum of 10 minutes (if the
ignition remains switched on during this time and OBD program is exited via the function 06 "End output").
-
Waiting period between each three attempts doubles each time up to a maximum of 255 minutes.
-
Press buttons -1- and -0- to select function 10, "Adaptation".
Indicated on display
Rapid data transfer
Q
10 - Adaptation
-
Confirm entry with -Q- button.
Indicated on display
Adaptation
Enter channel number XX
-
Press buttons -2- and -1- to select "Channel 21".
-
Press -Q- button to confirm input.
If this appears on display
Function is unknown or
->
cannot be carried out at the moment
-
Repeat adaptation function and secret number.
Indicated on display
Channel 21 ...... Adapting 2
->
<-1 3->
The top line of the display shows that 2 ignition keys are adapted to the system.
-
Press -> button.
Indicated on display
Channel 21 ...... Adapting 2
->
Enter adaptation value XXXXX
-
Press button -0- four times and then enter the total number of all ignition keys to be adapted, including existing key (e.g.: for a total of three
ignition keys, enter "00003"); max. possible Qty.: 8.
-
Press -Q- button to confirm input.
Indicated on display for 3 ignition keys to be adapted
Channel 21 Adapting 3
Q
<-1 3->
-
Press -Q- button to confirm input.
Indicated on display