New Beetle GLS L4-2.0L (AZG) (2002)
-
VAS 5051 Tester
VAG 1551 Scan Tool (ST), Connecting
All functions which were previously performed using the VAG 1551 or the VAG 1552 can also be performed using the new VAS 5051 tester in
operating mode Vehicle Self Diagnosis.
Requirements
-
All fuses OK according to wiring diagram
-
Battery voltage at least 9 volts
-
Connect VAG 1551 scan tool with VAG 1551/3B cable to Data Link Connector (DLC).
WARNING!
-
When driving or riding in an airbag- equipped vehicle, NEVER hold the scan tool or other test equipment in your hands or lap while in
motion. Objects between you and the airbag increase the risk of injury in an accident.
-
During a test drive in an airbag-equipped vehicle, test equipment must always be fastened to and operated from the rear seat by a second
technician.
Indicated on display 1)
V.A.G - ON BOARD DIAGNOSTIC
HELP
1 - Rapid data transfer
2 - Blink code output
1) Operating modes 1 and 2 are displayed alternately
Indicated on display
Rapid data transfer
HELP