New Beetle GLS L4-2.0L (AZG) (2002)
Suspension Spring ( Coil / Leaf ): Service and Repair
Coil Spring, Removing and Installing
Removing
-
Using VAG1752 suspension strut tensioner, compress coil spring until upper spring plate is free.
-
Remove hex nut from piston rod.
-
Remove components of suspension strut and coil spring using VAG1752 suspension strut tensioner.
1. Commercially available ratchet handle
2. T10001/8
3. T10001/11
4. T10001/5
5. VAG1752 suspension strut tensioner
6. VAG1752/4 retainer
3186 special socket wrench 21mm can be used instead of the tools listed above.
WARNING:
-
Make sure that the coil spring is seated correctly in the VAG775217 spring holder (arrow).
Installing
-
Install coil spring using VAG1752 suspension strut tensioner onto lower spring support.
-
End of coil spring must lie against stop (arrow).