New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
Sunroof / Moonroof Panel: Adjustments
Panel Seal, Adjusting
Panel Seal, Adjusting
-
Check that the pre-tension between panel seal -2- and body is uniform all-round using a 0.3 mm thick strip of paper (or a plastic credit-type card,
for example). It must be possible to pull the paper strip through between the panel seal and body under tension.
-
If the pre-tension is insufficient, the panel seal can be pushed apart with a wedge -1- , or if the pre-tension is excessive pushed together. To adjust
the panel seal the glass panel -3- must be removed.