New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
-
Remove clip -1-.
-
Press brake lever -2- in direction of arrow and unhook brake cable -3-.
-
Remove securing bolts from brake caliper housing, to do this counterhold on guide pins.
-
Remove brake caliper housing and secure with wire so that the weight of the brake caliper does not stress or damage the brake hose.
-
Remove brake pads and pad retaining springs -arrows-.
-
Clean brake caliper housing, in particular the bonding surface for the brake pad. It must be free of adhesive and grease residues.
-
Use methylated spirit only for cleaning the brake caliper housing.
Installing
Note:
Before pressing the piston back, draw off brake fluid from the reservoir. Use a bleeder bottle or a plastic bottle which is only used for brake fluid.
Brake fluid is poisonous and must not in any case be siphoned out by mouth through a hose.