New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
^
Remove as much brake fluid as possible from brake fluid reservoir using a bleeder bottle.
^
Install brake pedal depressor from VAG 1238 B or equivalent.
^
Connect bleeder bottle hose to left front brake caliper bleeder screw and open bleeder screw. Close bleeder screw.
^
Release control module connector (arrow -1-) and disconnect (arrow -2-).
^
Place plastic covering under control module and hydraulic unit. Do not use rags.
CAUTION! Do not let brake fluid enter electrical connectors.
^
Disconnect brake lines from hydraulic unit to brake master cylinder (arrows) and suspend with wire.
^
Disconnect remaining brake lines on hydraulic unit.
^
Seal brake lines and threaded holes (arrows) with plugs from repair kit, Part No. 1H0 698 311 A.