New Beetle Turbo S L4-1.8L Turbo (AWP) (2002)
3
-
Heating and A/C controls
-
Removing and installing
4
-
Temperature flap cable
-
From temperature rotary control to temperature flap
-
Cable sleeve marking: Beige
-
Installing and adjusting, refer Fig. 1
Fig. 1 Temperature flap cable, installing and adjusting
Cable sleeve marking: Beige
Prerequisites:
-
Heating and ventilation controls are installed.
-
Connecting duct removed. See: Air Duct/Service and Repair
Adjusting
-
Turn temperature rotary control knob to left onto stop.
-
Attach center wire of cable -1- to the temperature flap lever -2-.
-
Push temperature flap lever -2- onto stop -arrow A- and secure outer cable -1- with clip -3-.
-
Turn temperature rotary control knob to left and right onto stops.
When turning the rotary control knob both end stops must be reached.
Fig. 2 Footwell/defrost flap cable, installing and adjusting
Cable sleeve marking: Green
Prerequisite:
-
Heating and ventilation controls are installed.
Adjusting